公众号.jpg     全国销售热线:800 820 2380
 24小时服务热线:400 820 2380  
阿里巴巴店铺CN
Home > Product > Air compressor for laser cutting use > Two-stage permanent magnet variable frequency screw machine for laser cutting
Two-stage permanent magnet variable frequency screw machine for laser cutting
  • The maximum advantage of air cut is that the cost is low, especially for stainless steel, aluminum plate, galvanized plate and nitrogen cutting effect. In some aspects, the effect of nitrogen cutting, and the steel plate (3mm) can be completely replaced by oxygen cut, no matter From cost or subsequent service costs and the effects of use, the combination of air compressions is very ideal for laser cutting gas, and minimum can save more than 50%.

Details determine attitude

Every detail is only for a better user experience

  • 01

    control

    Personalized control system
    The operating status is clear at a glance, and the monitoring system operates in real time.
  • 02

    control

    Microcomputer control system
    Phase loss protection/phase sequence control, temperature protection/air volume adjustment
  • 03

    Filter

    Imported filter system
    High-efficiency oil filter to filter out impurities in lubricating oil
  • 04

    Cooling

    Efficient cooling system
    High heat dissipation efficiency, ensuring 24 hours continuous work in high temperature and high humidity environment
  • 05

    Host

    High-efficiency screw host
    High-precision screw rotor, triple sealed shaft, less wearing parts
  • 06

    Silencer

    Exhaust muffler
    The inner sound-absorbing cotton effectively reduces noise, and the machine runs with low noise and vibration
Two-stage permanent magnet variable frequency screw machine for laser cutting
Product number

SRCLC-50SAT

SRCLC-75SAT

SRC-100SAT

Pressure range bar(g)                                 16
Displacement m³/min

3.6

6.5

9.1

Cooling method                                          Air-cooled
Unit size mm

1500

*1000

*1350

2100

*1300

*1650

2100

*1300

*1650

Unit weight KG70012501300
Power KW37

55

75
Rated voltage / frequency (V/HZ)                                         380/50


Maintenance tips

Warranty period: (except for damage caused by man-made or natural disasters)

  • The main head of the screw air compressor is guaranteed for two years under normal use and maintenance, and the whole machine and electrical parts are guaranteed for one year (except maintenance consumables);

  • The first maintenance of the new screw air compressor is 500 hours in working condition: replace the air filter, oil filter and special oil for air compressor; afterwards, replace the air filter, oil filter, oil separator and special oil for air compressor every 2000 hours.

  • Failure to use Schneider Risheng's original maintenance parts and overdue non-maintenance causes quality problems for the machine, and this machine is not covered by the warranty.

Message

Dear friends, welcome to the Schneider-Sunshine website. We will answer your questions as soon as possible!

If you have detailed product requirements, please fill in carefully, and we will get in touch with you as soon as possible!

网页聊天